Hi Alfonso
The meeignin Boston was great and I was enjoyed and took a lot from it. I am currently running a new project with 28 subjects and 11 had a condition of disease with NCI and 11 had disease with out NCI and 6 normal controls. These were factored as different conditions on a single run ( y axis change for each of the condition)
Preprocessing ran well and then when you hit done after preprocessing it comes up with this message which I do not understand. There is one ,message for all the subjects
I looked a the first level covariates and second level covariates are all good too. all the subject scans are ok. The conditions was attached as file and I forgot to mention that its a single run.
the message isERROR: Subject 1 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 1 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 2 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 2 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 3 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 3 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 4 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 4 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 5 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 5 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 6 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 6 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 7 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 7 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 8 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 8 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 9 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 9 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 10 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 10 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 11 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 11 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 12 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 12 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 13 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 13 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 14 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 14 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 15 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 15 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 16 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 16 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 17 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 17 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 18 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 18 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 19 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 19 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 20 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 20 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 21 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 21 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 22 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 22 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 24 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 25 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 26 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 27 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 28 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
CONN18.b
SPM12 + DEM FieldMap MEEGtools cat12
Matlab v.2019a
project: CONN18.b
storage: 4649.3Gb available
spm @ /Applications/spm12
conn @ /Applications/conn
The meeignin Boston was great and I was enjoyed and took a lot from it. I am currently running a new project with 28 subjects and 11 had a condition of disease with NCI and 11 had disease with out NCI and 6 normal controls. These were factored as different conditions on a single run ( y axis change for each of the condition)
Preprocessing ran well and then when you hit done after preprocessing it comes up with this message which I do not understand. There is one ,message for all the subjects
I looked a the first level covariates and second level covariates are all good too. all the subject scans are ok. The conditions was attached as file and I forgot to mention that its a single run.
the message isERROR: Subject 1 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 1 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 2 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 2 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 3 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 3 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 4 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 4 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 5 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 5 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 6 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 6 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 7 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 7 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 8 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 8 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 9 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 9 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 10 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 10 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 11 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 11 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 12 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 12 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 13 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 13 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 14 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 14 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 15 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 15 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 16 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 16 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 17 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 17 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 18 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 18 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 19 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 19 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 20 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 20 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 21 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 21 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 22 does not have any scan associated with condition HE. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 22 does not have any scan associated with condition CTRLS. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 24 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 25 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 26 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 27 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
ERROR: Subject 28 does not have any scan associated with condition CIRR. If this is expected/correct please select 'Allow missing data' in Setup.Conditions to avoid this error message
CONN18.b
SPM12 + DEM FieldMap MEEGtools cat12
Matlab v.2019a
project: CONN18.b
storage: 4649.3Gb available
spm @ /Applications/spm12
conn @ /Applications/conn