Greetings everyone,
I've been learning Conn and created a few 'test' projects. Once I began to understand how it worked, I created a "conn_Master" project, that I would merge with a couple of other projects. The merge process seems straight forward. I now have two projects I'd like to merge, "conn_Master" and "conn_project_06" - I have spent two days working on this without success.
[b]What I’ve done[/b]
Following the video tutorials
[b](#1) [/b]conn_Master project (4-subjects, 4-sessions)[list=1]
[*]started with 1 condition (rest)[*]renamed the first analysis to network_SBC[*]removed all the 'Seeds/Sources' from the left side [*]added multiple networks and regions to 'Seeds/Sources' from the choices on the right[list]
[*]These are a 1x53 cell in conn_Master/results/firstlevel/Networks_SBC/_list_sources.mat[/list]
[*]followed the rest of the videos step-by-step[*]After video #3, I renamed condition “rest” to “rest_pre” (session 1-2 =entire session; 3-4=missing)[list]
[*]added condition “rest_post (session 1-2=missing; 3-4=entire session)[*]added condition “rest” to the bottom of the list (sessions 1-4=entire session)[/list]
[*]clicked “Done”[*]Re-did Denoising[*]Re-did first-level Analysis[*]re-did second-level Analysis[*]removed all but networks.DefaultMode.MPFC (1,55,-3) from the 'Seeds/Sources' [list]
[*]after repeating steps 8-10, rather than a 1x1 cell, there is still a 1x53 cell in conn_Master/results/firstlevel/Networks_SBC/_list_sources.mat[/list]
[*]Returned to Setup->Conditions, removed the “third” condition named “rest”[*]clicked “Done”[*]Re-did Denoising[*]Re-did first-level Analysis[*]re-did second-level Analysis[*]The file:conn_Master/results/firstlevel/Networks_SBC/_list_conditions.txt has:[list]
[*]Condition002 = rest_pre[*]Condition003 = rest_post[/list]
[/list][b](#2) [/b]creating 'conn_project_06' (5-subjects, 4-sessions)[list=1]
[*]started with 3-conditions[list]
[*]“rest_pre” (session 1-2 =entire session; 3-4=missing)[*]“rest_post (session 1-2=missing; 3-4=entire session)[*]“rest” to the bottom of the list (sessions 1-4=entire session)[/list]
[*]renamed the first analysis to network_SBC[*]removed all the 'Seeds/Sources' from the left side[*]added only the 1st networks.DefaultMode.MPFC (1,55,-3) to 'Seeds/Sources' from the choices on the right[list]
[*]this is a 1x1 cell in: conn_project_06/results/firstlevel/Networks_SBC/_list_sources.mat[/list]
[*]followed the rest of the video step-by-step[*]After video #2, I returned to Setup->Conditions, removed the “third” condition named “rest”[*]clicked “Done”[*]Re-did Denoising[*]Re-did first-level Analysis[*]re-did second-level Analysis[*]The file: conn_project_06/results/firstlevel/Networks_SBC/_list_conditions.txt has[list]
[*]Condition001 = rest_pre[*]Condition002 = rest_post [/list][/list]
[b]What I want to do[/b][list=1][*]My main goal is to merge the projects[*]Remove all but the networks.DefaultMode.MPFC (1,55,-3) in the conn_Master/results/firstlevel/Networks_SBC/_list_sources.mat[/list]
[b]Problems/Issues/Errors[/b][list=1][*]Trying to merge the projects via the gui I get this error message:[list]
[*]Incompatible condition names with project /Volumes/Data/Imaging/ConnTest2/conn_project_06.mat[/list][/list]
I have tried everything short of completely creating a new “Master project”
Any help with this issue would be great appreciated as I have several other projects to add to the master project.
Cheers,
Jason
——————————————————————————
Software:
Matlab 2015a
SPM12
conn 17.f
I've been learning Conn and created a few 'test' projects. Once I began to understand how it worked, I created a "conn_Master" project, that I would merge with a couple of other projects. The merge process seems straight forward. I now have two projects I'd like to merge, "conn_Master" and "conn_project_06" - I have spent two days working on this without success.
[b]What I’ve done[/b]
Following the video tutorials
[b](#1) [/b]conn_Master project (4-subjects, 4-sessions)[list=1]
[*]started with 1 condition (rest)[*]renamed the first analysis to network_SBC[*]removed all the 'Seeds/Sources' from the left side [*]added multiple networks and regions to 'Seeds/Sources' from the choices on the right[list]
[*]These are a 1x53 cell in conn_Master/results/firstlevel/Networks_SBC/_list_sources.mat[/list]
[*]followed the rest of the videos step-by-step[*]After video #3, I renamed condition “rest” to “rest_pre” (session 1-2 =entire session; 3-4=missing)[list]
[*]added condition “rest_post (session 1-2=missing; 3-4=entire session)[*]added condition “rest” to the bottom of the list (sessions 1-4=entire session)[/list]
[*]clicked “Done”[*]Re-did Denoising[*]Re-did first-level Analysis[*]re-did second-level Analysis[*]removed all but networks.DefaultMode.MPFC (1,55,-3) from the 'Seeds/Sources' [list]
[*]after repeating steps 8-10, rather than a 1x1 cell, there is still a 1x53 cell in conn_Master/results/firstlevel/Networks_SBC/_list_sources.mat[/list]
[*]Returned to Setup->Conditions, removed the “third” condition named “rest”[*]clicked “Done”[*]Re-did Denoising[*]Re-did first-level Analysis[*]re-did second-level Analysis[*]The file:conn_Master/results/firstlevel/Networks_SBC/_list_conditions.txt has:[list]
[*]Condition002 = rest_pre[*]Condition003 = rest_post[/list]
[/list][b](#2) [/b]creating 'conn_project_06' (5-subjects, 4-sessions)[list=1]
[*]started with 3-conditions[list]
[*]“rest_pre” (session 1-2 =entire session; 3-4=missing)[*]“rest_post (session 1-2=missing; 3-4=entire session)[*]“rest” to the bottom of the list (sessions 1-4=entire session)[/list]
[*]renamed the first analysis to network_SBC[*]removed all the 'Seeds/Sources' from the left side[*]added only the 1st networks.DefaultMode.MPFC (1,55,-3) to 'Seeds/Sources' from the choices on the right[list]
[*]this is a 1x1 cell in: conn_project_06/results/firstlevel/Networks_SBC/_list_sources.mat[/list]
[*]followed the rest of the video step-by-step[*]After video #2, I returned to Setup->Conditions, removed the “third” condition named “rest”[*]clicked “Done”[*]Re-did Denoising[*]Re-did first-level Analysis[*]re-did second-level Analysis[*]The file: conn_project_06/results/firstlevel/Networks_SBC/_list_conditions.txt has[list]
[*]Condition001 = rest_pre[*]Condition002 = rest_post [/list][/list]
[b]What I want to do[/b][list=1][*]My main goal is to merge the projects[*]Remove all but the networks.DefaultMode.MPFC (1,55,-3) in the conn_Master/results/firstlevel/Networks_SBC/_list_sources.mat[/list]
[b]Problems/Issues/Errors[/b][list=1][*]Trying to merge the projects via the gui I get this error message:[list]
[*]Incompatible condition names with project /Volumes/Data/Imaging/ConnTest2/conn_project_06.mat[/list][/list]
I have tried everything short of completely creating a new “Master project”
Any help with this issue would be great appreciated as I have several other projects to add to the master project.
Cheers,
Jason
——————————————————————————
Software:
Matlab 2015a
SPM12
conn 17.f